一、产品介绍（Product introduction）

由许多圆环结绕而成，小环按径向排列而组成的一个大扁球体，也类似于一个旋形单簧首尾相接绕成一个圆球体，根据外形其中又分带A花环填料、不带A花环填料，还有带刺花环填料。

It is composed of many rings, and the small rings are arranged radially to form a large flat sphere, which is also similar to a spiral clarinet end to end and winding into a sphere, which is divided into A garland filler, no A garland filler, and barbed garland filler according to the shape.

该填料除具有一般的能量大，压降低等优点外，还由于填料空隙处能有较高的持液量，可使塔内液体的停留时间较长，从而增加了气液两相的接触时间，提高了填料的传质效率。

In addition to the advantages of large energy and reduced pressure, the filler can also have a high holding capacity at the filler void, which can make the liquid in the tower stay longer, thereby increasing the contact time of the gas-liquid two phases and improving the mass transfer efficiency of the filler.

二、产品用途（Product Usage）

塑料花环填料的主要特点是填料的空隙率大，不易被堵塞，还有通量大、阻力小等优点，花环填料也称梅花环填料是由许多圆环结绕而成。

The main feature of plastic garland filler is that the void rate of the filler is large, it is not easy to be blocked, and there are advantages such as large flux and small resistance, and the garland filler is also called plum blossom ring filler is made of many ring knots.

由于这种CPVC氯化聚氯乙烯花环填料干燥塔项目，CPVC泰勒花环的间隙处能有较高的滞液量，可使塔内液体停留时间较长，从而增加了气液的接触时间，提高了效率。

Due to this CPVC chlorinated POLYVINYL chloride wreath filler drying tower project, cpVC Taylor wreath can have a higher amount of hysteresis at the gap, which can make the liquid in the tower stay longer, thereby increasing the contact time of gas and liquid and improving efficiency.

三、适用范围（Scope of application）

该填料除具有一般的能量大，压降低等优点外，还由于填料空隙处能有较高的持液量，可使塔内液体的停留时间较长，从而增加了气液两相的接触时间，提高了填料的传质效率。

In addition to the advantages of large energy and reduced pressure, the filler can also have a high holding capacity at the filler void, which can make the liquid in the tower stay longer, thereby increasing the contact time of the gas-liquid two phases and improving the mass transfer efficiency of the filler.

使用PPVC、CPVC材质花环填料解决了陶瓷和常规塑料填料被氯碱、次氯酸钠、氢氧化钠腐蚀或氧化问题。

The use of PPVC, CPVC material garland filler solves the problem of ceramic and conventional plastic filler being corroded or oxidized by chlor-alkali, sodium hypochlorite, sodium hydroxide.

材质有聚丙烯（PP）、RPP(玻璃增强聚丙烯)、聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）、聚偏氟乙烯（PVDF）等各种塑料材质。

Materials include polypropylene (PP), RPP (glass reinforced polypropylene), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF) and other plastic materials.

四、技术指标（Technical specifications）